There are panels – and there are premium panels. Our UltraStock® products are manufactured with 100% NAF resins to provide optimized panel solutions for a wide selection of performance characteristics. The technology combines refined fiber resources with a proven production process to produce panels for jobs that demand efficient machinability, top-grade finishing characteristics and high-volume performance.
Cuts and routes cleanly.
Manufactured with 100% NAF resin.
Decorative edge profiles and intricate contours deep in the core are easily produced.
Can be painted, printed, stained, veneered or laminated with excellent results.
Machined edges are smooth and perform equally well for wet or dry film edge finishing.
Features MR10 thickness-swell, moisture-resistance designation.
Moulding and millwork, furniture, RTA furniture, cabinets, store fixtures and laminate flooring
All UltraStock panels are recognized by the California Air Resources Board (CARB) as no added formaldehyde (NAF) products by Executive Order N-15-021a
1/4” – 1-1/2”
To 5’
To 16’
| < 3/8” 3/8” to <1/2” 1/2” to 3/4” >3/4” |
| 4050 3130 3130 3130 |
| 405 313 313 313 |
| 110 100 90 85 |
| 235 235 235 235 |
| NA NA 215 205 |
| ✔ ✔ ✔ ✔ |
| ≤0.0325″ ≤0.0325″ <5.5% <5.5% |
± 1/16” per panel
± 1/64” per ft. of length
± 1/64” per ft. of length
± 0.005”
± 0.005”
| Awards 1 or 2 points for using products with recycled content that constitute at least 10% or 20%, based on cost, of the total value of project materials. |
| Awards 1 or 2 points for using materials on a project that are extracted and manufactured within 500 miles that constitute at least 10% or 20%, based on cost, of the total value of project materials. |
| Requires composite wood products used on project to demonstrate documented compliance with California Air Resources Board ATCM formaldehyde requirements for ultra-low-emitting formaldehyde (ULEE) resins or no-added-formaldehyde (NAF) resins. |
| Specifies architects to select low-VOC emitting materials |
| Use recycled content products in major areas such as walls, floor, insulation and roofing. |
| Wood or wood-based products available that are certified by Forest Stewardship Council™. |
| Wood-based components certified in accordance to CPA ECC 4-11. |
| In compliance with ANSI A208.1. |
| In compliance with CPA ECC 4-11. |
| Composite wood contains no urea formaldehyde. |
UltraStock products produced in the Georgia-Pacific facility in Mt. Jewett, Pennsylvania, have been awarded the Composite Panel Association (CPA) Eco-Certified Composite (ECC) grademark which verifies compliance with the CPA 4-11 ECC Sustainability Standard, the California Air Resources Board (CARB) Airborne Toxic Control Measure (ATCM) 93120 and the EPA TSCA Title VI rule.
UltraStock that is certified to conform to the requirements of Forest Stewardship Council® standards for FSC Mix Chain of Custody and Controlled Wood manufacturing is available by special order.
Based on ANSI A208.2-2016 section 3.6, to receive the MR10 designation product samples must demonstrate the 24-hour thickness swell test value of 5.5% or less.
All UltraStock is CARB and EPA TSCA Title VI compliant. This product contains no added formaldehyde.
