High-performing fiberglass mat gypsum panels suitable for your wall, roof and partition projects, worldwide
Available worldwide, Dens® Solutions are industry trusted, high-performing fiberglass mat gypsum panels. DensGlass® Sheathing, DensElement® Barrier System, DensShield® Tile Backer, DensGlass® Shaftliner and DensArmor Plus® Interior Panels carry the mark of the valued heritage in our Gold colour, as a visible standard-bearer of Georgia-Pacific’s position as the first manufacturer to create a fiberglass mat board and as a relentless innovator of strength and moisture resistant products for over 30 years.
DensGlass® Sheathing is a gypsum panel consisting of a treated, water-resistant core, surfaced with fiberglass mats and a Gold coloured primer coating.
DensGlass® Sheathing can be used as an external sheathing for steel and timber framing and is backed with a limited warranty against delamination and deterioration for up to 12 months of exposure to normal weather conditions.
DensElement® Barrier System serves as a water resistant barrier and air barrier when the sheathing joints, fasteners, penetrations, openings and transitions are properly sealed with an approved fluid applied flashing.
The DensElement® Barrier System can be used under a wide range of adhered, attached and rainscreen cladding systems.
The DensDeck® Roof Board employs fiberglass mats front and back that are mechanically bonded to a high density gypsum core, providing excellent fire resistance and wind uplift properties.
DensDeck® Roof Board products are compatible with many types of roofing systems, including: Reinforced bituminous membranes, mastic asphalt, liquid waterproofing, single ply, metal systems, wood shingle and shake, tile, and slate
DensShield® Tile Backer is composed of a water-resistant treated core that is covered front and back with fiberglass mats. On the tile side, DensShield® Tile Backer’s built-in coating on the surface stops surface water and retards moisture transmission, helping to protect the wall/floor.
DensShield® Tile Backer is an ideal tile substrate for interior walls, ceilings, residential and light commercial floors and countertop applications in high moisture areas such as bathrooms, showers, kitchens, laundries, swimming pool areas and locker rooms
DensGlass® Shaftliner consists of a water-resistant, non-combustible gypsum core surfaced with coated fiberglass mats that provide superior resistance to the elements and resists the growth of mould.
DensGlass® Shaftliner is one component in a gypsum board shaftwall, stairwell, mechanical duct and area separation wall systems. The panels are key components in the H-Stud Area Separation Fire Wall System.
DensArmor Plus® Interior Panels, which feature fiberglass mats instead of the paper facings used on the surface of traditional gypsum board products, resist mould growth.
DensArmor Plus® Interior Panels are ideal for areas prone to high humidity such as basements and residential bathrooms
DensArmor Plus® Abuse-Resistant Interior Panels are interior panels that consist of a moisture-resistant, non-combustible dense gypsum core with coated fiberglass mat facings which provide superior abuse resistance along with protection from incidental moisture.
DensArmor Plus® Abuse-Resistant Interior Panels are an interior wall or ceiling covering material designed for use in areas requiring abuse resistance such as corridors in hospitals, schools, dormitories and public buildings.
DensArmor Plus® Impact Resistant Interior Panels are interior panels that consist of a moisture-resistant, non-combustible dense gypsum core and a strong layer of embedded fiberglass mesh with coated fiberglass mats.
DensArmor Plus® Impact-Resistant Interior Panels are an interior wall or ceiling covering material designed for use in ultra-high traffic areas such as corridors in healthcare facilities, schools and correctional institutions, or where abuse may be intentional rather than accidental.
Note: *ASTM D3273 measures mould growth in a 4 week controlled laboratory test. The mould resistance of any building product when used in actual job site conditions may not produce the same results as were achieved in the controlled, laboratory setting. No material can be considered mould proof.