DensArmor Plus® Interior Panels, which feature fiberglass mats instead of the paper facings used on the surface of traditional gypsum board products, resist mould growth. They’re ideal for areas prone to high humidity such as basements and residential bathrooms, and are ideal for commercial installations. They are designed for direct attachment with screws or nails to timber and metal framing or existing surfaces. They may be used as a
covering material for flat or curved structures.
Fiberglass mats, instead of paper facings, eliminate a potential food source for mold growth and may reduce remediation and scheduling delays associated with paper-faced drywall
DensArmor Plus® Abuse-Resistant Interior Panels are perfect for hallways, dorm and hospital rooms and other high traffic areas where scuffing and abrasions may occur
DensArmor Plus® Impact-Resistant Interior Panels, with an embedded mesh for the ultimate performance, excel in ultra high traffic areas such as dorms and hospital corridors or secure areas such as correctional institutions.
Non-combustible as described and tested in accordance with BS EN 13501-1, ASTM E136 or CAN/ULC S114
DensArmor Plus® Interior Panels have fiberglass mats for superior mold and moisture resistance compared to paper-faced drywall.
DensArmor Plus® Interior Panels, which feature fiberglass mats instead of the paper facings used on the surface of traditional gypsum board products, resist mold growth. When tested, as manufactured, in accordance with ASTM D3273, DensArmor Plus® Interior Panels have scored a 10, the highest level of performance for mold resistance under the ASTM D3273 test method, a testing method set by ASTM International, which develops testing guidelines and procedures for building materials, products, systems and services. The score of 10, in the ASTM D3273 test, indicates no mold growth in a 4-week controlled laboratory test. In addition, the mold resistance of DensArmor Plus® Interior Panels have been validated by UL Environment and listed in its Sustainable Product Guide utilizing microbial resistant testing based on ASTM Standard D6329-98.
The mold resistance of any building product when used in actual job site conditions may not produce the same results as were achieved in the controlled, laboratory setting. No material can be considered mold proof. When properly used with good design, handling and construction practices, DensArmor Plus® Interior Panels provide increased mold resistance compared to standard paper-faced gypsum products. For additional information, go to www.buildgp.com/safetyinfo.
DensArmor Plus® Interior Panels are the first gypsum panels to be certified by UL Environment, an independent safety science company, as GREENGUARD and GREENGUARD Gold for low VOC emissions and are included in UL Environment’s Sustainable Product Guide.
DensArmor Plus® Abuse-Resistant Interior Panels are formulated for high traffic areas such as corridors in hospitals, schools and other public buildings. This tested, abuse-resistant, interior drywall resists abrasions, gouging, indentation, scrapes and bumps that can mar traditional drywall.
Surface Abrasion: Level 3 Tested in accordance with ASTM C1629.
Surface Indentation: Level 1 Tested in accordance with ASTM C1629.
Soft-body Impact: Level 1 Tested in accordance with ASTM C1629.
DensArmor Plus® Impact-Resistant Interior Panels are perfect for high traffic areas such as corridors in hospitals, schools and other public buildings and other high traffic areas where scuffing and abrasions may occur, or where abuse may be intentional rather than accidental.
Surface Abrasion: Level 3 Tested in accordance with ASTM C1629.
Surface Indentation: Level 1 Tested in accordance with ASTM C1629.
Soft-body Impact: Level 3 Tested in accordance with ASTM C1629.
Hard-body Impact: Level 2 Tested in accordance with ASTM C1629.
Connect with a Georgia-Pacific Sales Representative
LET’S TALK
Fill out the contact form to get in touch with a Georgia-Pacific sales rep.
