image 1
thumbnail

TemStock W® Particleboard

  • Value engineered for reduced weight
  • Up to 10 percent lighter than standard particleboard
  • Helps minimize machine and tool wear
Download

Product Details

This detailing compound protects rough wall openings, penetrations, joints, sheathing fasteners and seams. It eliminates the need for joint reinforcing tape and reducing installation time. This detailing compound protects rough wall openings, penetrations, joints, sheathing fasteners and seams.

Product Specifications

DIMENSIONS

Thicknesses1/4” – 1-1/8”
Panel Sizes49” x 73”- 169”, countertops and shelving available

AVERAGE PHYSICAL PROPERTIES TESTED

<3/8”3/8” to 1/2”1/2” to <1”1”
MOR-Modulus of Rupture (psi)1450145014501450
MOE-Modulus of Elasticity (kpsi)246.6246.6246.6246.6
IB-Internal Bond (psi)80707065
Face Screw Holding Capacity (lbs)180180180180
Edge Screw Holding Capacity (lbs)NANA1403140


1 One-panel minimum average (ASTM D1037 / ANSI A208.1)
2 Not applicable for thinner than 5/8″

TOLERANCES

Length & Width± 1/16”
Squareness< 1/8”
Straightness± 1/64” per 2 ft. of length
Thickness (within panel average)± 0.004”
Thickness (panel to panel average)± 0.004”

ENVIRONMENTAL CREDITS

Recycled Content (MR credit 4)Awards 1 or 2 points for using products with recycled content that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Regional Materials (MR credit 5)Awards 1 or 2 points for using materials on a project that are extracted and manufactured within 500 miles that constitute at least 10% or 20%, based on cost, of the total value of project materials.
Environmental Quality (EQ credit 4.4)Requires composite wood products used on project to demonstrate documented compliance with California Air Resources Board ATCM formaldehyde requirements for ultra-low-emitting formaldehyde (ULEF) resins or no-added-formaldehyde (NAF) resins.
Low-VOC Emitting Materials (G2.9)Specifies architects to select low-VOC emitting materials
Pre-consumer Recycled Content (604.1(2))Use recycled content products in major areas such as walls, floor, insulation and roofing.
FSC® Certification (606.2(3))Wood or wood-based products available that are certified by Forest Stewardship Council™.
Other Certification (606.2(6))Wood-based components certified in accordance to CPA ECC 4-19.
Low Formaldehyde/VOC Emissions (901.4(a))In compliance with ANSI A208.1.
Low Formaldehyde/VOC Emissions (901.4(c))In compliance with CPA ECC 4-19.
Low Formaldehyde/VOC Emissions (901.4(d))Composite wood contains no urea formaldehyde.

CERTIFICATIONS

ECC CERTIFICATIONTemStock particleboard products are produced at the Georgia-Pacific facility Diboll, Texas have been awarded the Composite Panel Association (CPA) Eco-Certified Composite (ECC) grademark
FSC® CERTIFICATIONParticleboard that is certified to conform to the requirements of Forest Stewardship Council® standards for Reclaimed Material Chain of Custody and Controlled Wood manufacturing is available by special order from Georgia-Pacific.
EPA TSCA, TITLE VITemStock FR Particleboard is CARB and EPA TSCA Title VI compliant. Panels are available with either a ULEF or NAF designation.

Warning: This particleboard contains low fuming urea formaldehyde resin and may release formaldehyde vapors in low concentrations. Formaldehyde vapors can be potentially irritating to the eyes and upper respiratory system. Should irritation develop, consult your physician.

Resources

Product Data Sheet
Safety Datasheets
Thumbnail Image
Temstock Particleboard Panels Product Data Sheet
0 Selected ResourcesUnselect all
Thumbnail Image
Temstock Panels NAF Safety Data Sheet-English US
Thumbnail Image
Temstock Panels Safety Data Sheet - English Canada
Thumbnail Image
Temstock Panels Safety Data Sheet-English US
Thumbnail Image
Temstock Panels Safety Data Sheet - French Canada
Thumbnail Image
Temstock Panels Safety Data Sheet - Spanish Mexico
0 Selected ResourcesUnselect all

Related Products