* ToughRock Sheathing is not intended for long-term exposure to the weather. Local weather conditions will dictate the length of time sheathing may be left exposed. The sheathing should be covered by an exterior finish cladding or building felt or equivalent protection if weather conditions will be severe during construction.
For important product fire, safety, and use information, go to buildgp.com/safetyinfo.
Durable, moisture- and mold-resistant fiberglass mat roof boards for a wide variety of roofing systems. Use for new and re-roofing applications. DensDeck provides a superior thermal barrier, and is widely used in single ply and multi-ply mechanically-attached systems as a cover board.
The DensElement™ Barrier System is an all-in-one, water-resistive and air barrier (WRB-AB) system solution that completely eliminates an additional WRB over the face of the sheathing in commercial construction. The enhanced, fiberglass mat sheathing panel integrates a WRB-AB directly within its core.
Widely recognized by the GOLD color, DensGlass Sheathing is the ideal choice for the high-performance built environment. DensGlass is built to stay strong and provide superior moisture and mold resistance, and provides a rigid substrate for a wide variety of air or water-resistive barrier systems.
With 100% recycled paper facings front and back, ToughRock® Sheathing is a moisture-resistant substrate for use in new building construction or renovation work that is covered by an exterior finish cladding such as vinyl/fiber cement siding, masonry veneer, or wire lath stucco.
Designed to be used as exterior ceilings that are protected from direct exposure to water, ToughRock Soffit Board resists sag and moisture and ideal in applications such as carports, garages, open porches, canopies, and walkways.
ToughRock® Gypsum Boards, with recycled paper facings front and back, are ideal for a variety of drywall applications including: interior walls and ceilings, high-traffic institutional interiors, exterior sheathing and soffit.
UL Classified, Type X gypsum boards, as defined in ASTM C1396, for use in select fire-rated assemblies.*
Fireguard 45® Gypsum Board
Lite-Weight Fire-Rated Gypsum Board
Fireguard X® and Fireguard C® Gypsum Boards
Fireguard X® Abuse-Resistant Gypsum Board
Fireguard X® Sheathing
Fireguard C® Soffit Board
Fireguard X® Mold-Guard™ and Fireguard X® Mold-Guard™ Abuse-Resistant Gypsum Boards
Fireguard X® Stretch 54® Gypsum Board
Fireguard X® Veneer Plaster Base
Extra protection against mold and mildew with paper-face boards. Available in 1/2" and 5/8" Type X, including an abuse-resistant panel.
Mold-Guard™ Gypsum Boards
Paper-faced shaftliner for stairwells, shaft wall, duct work, and area separation walls.
Regular and Type X substrate for veneer plaster applications, known generically as blue board.
Veneer Plaster Base
* For additional information concerning fire ratings, go to www.buildgp.com/safetyinfo.
LEED, USGBC and related logo are trademarks owned by the U.S. Green Building Council and are used by permission.